KCLUG

kclug@kclug.org

5 participants
3248 discussions

Re: Preferred Linux Flavor for Web Server?
by cragos＠gmail.com 13 Mar '07

13 Mar '07

On Tuesday 13 March 2007 01:47:18 am Luke-Jr wrote: >I've run a number of RPM based servers that didn't have X or >ALSA. I've had >problems with gentoo wanting to support wacom drawing >tablets for almost any >application I tried to install - including documentation >packages! Debian & Ubuntu's server & LAMP installs can also quite easily be installed without X. X is not installed by default on either of the latter. I installed the Ubuntu over Gentoo when I needed to drastically cut the staging time/axe the overhead of make. Used the same partition scheme, and had absolutely no issues. I believe it used a similar amount of space on disk for the nearly identical package set I installed. On the matter of hardware support in Gentoo, on occasion it can be a little finicky, but when running astandard hardware or doing other screwball things, I've generally had better luck with Gentoo than most. -Sean

3 2

Shared block device
by Billy Crook 13 Mar '07

13 Mar '07

Anyone know of a way to share a block device like Raid-1 across multiple machines? I want to get two machines to share files to the same group of clients for R/W access and have changes replicated between the two machines, so they'd be effective immediately for the other clients. A month ago, I googled, and found a wiki of a bunch of different systems but they each had some fault. Some could only be written to from one place. The comparison section of the page left me ultimately thinking the only things that did what i wanted were GoogleFS (NOT public) and a couple others that were really expensive. I don't even so much care that the block device is whats replicated, but trying to replicate a file system on demand like that I'm guessing is not possible for locking reasons. (Two people from different servers could lock the same file in the same place and make changes to it. Has anyone here done anything like this before?

9 12

Re: Preferred Linux Flavor for Web Server?
by cragos＠gmail.com 13 Mar '07

13 Mar '07

>What flavor of Linux would you run on it? >Mainly I'm looking for someone with experience >running Linux on this machine but opinions are >welcome as well. I built a simlilar P3-600 last year to do the same sort of thing. Just wanted to point out the obvious, because it didn't hit me until I'd had make and gcc running for a couple of days straight: Don't use Gentoo. I ended up using Ubuntu Server, but there's not much different between it and Debian. In some cases, Debian actually is more up-to-date than Ubuntu with regard to some server-side applications, like the IlohaMail PHP webmail client package. Apparently still is, 8 months later: https://bugs.launchpad.net/ubuntu/+source/ilohamail/+bug/52462 I'd just say go with what you're comfortable with, unless it's mostly compiled from source. -Sean Crago

7 20

Display flickering
by Billy Crook 13 Mar '07

13 Mar '07

Every once in a while, on average once every ten or so seconds, my display flickers black and comes right back. Almost like what I would expect if I were changing resolutions, but the resolution is not changing and I have no idea what causes this. The video chipset is nvidia quadro fx2500 w/512mb. The driver is nvidia's latest (1.0-9755). Xorg is at 7.1.1 (70101000). I'm running FC6 on kernel 2.6.19-1.2911.6.5.6.1.fc6.jwltest.27 on a core2duo. The display is the laptop display, and while I haven't tried with an external, I am reasonably sure it's not the display. It happens when the laptop is idle or in use. It happens with or without beryl. It happens on JWL's testkernel and without. JWL is a redhat kernel devel, and his patch enables my PCIE wireless card. I've only seen it while in X, but that's 99.9% of time anyway. What's a good place on the system to look to figure out what the glitch is? People look to this system as an example of Linux, and I hate to have them think it's that sketchy.

2 1

FreeBSD Security Audting
by Scott Oertel 13 Mar '07

13 Mar '07

Does anyone here have experience using the built in Security Auditing feature provided with 6.x releases of FreeBSD? I'm working on configuring it just perfect so that it doesn't log too much nonsense, but I can still possibly see security breaches. Does anyone have any config examples they're using in production? -SO

1 0

Preferred Linux Flavor for Web Server?
by RtX 12 Mar '07

12 Mar '07

OK, so now I'm gonna setup a web server on this Compaq Proliant 3000. I anticipate running Apache2, mysql, ssh, ftp, samba, and possibly Teamspeak on it. System specs are: Dual Pentium-II 400 Mhz 896MB Ram 28GB RAID 5 Storage (7 drives) What flavor of Linux would you run on it? Mainly I'm looking for someone with experience running Linux on this machine but opinions are welcome as well. -- RtX... Ty Unes - Overland Park, Ks. riverty(a)gmail.com

6 9

Proliant 3000 Server
by RtX 12 Mar '07

12 Mar '07

I have a Compaq Proliant 3000 Server. It is a dual Pentium II 400 with 7 SCSI drives. I am trying to get this server setup with some flavor of Linux (I haven't decided which yet) but am having trouble setting up the disk array. Maybe I'm really off base but I'm going off of other setups where I would configure the RAID array before installing the OS. I have downloaded and created the Compaq SmartStart 5.5 CD and seems to boot and do what it's supposed to do. However, when I try to run the Array Configuration Utility, it bombs. I have tried to run this utility from the CD. It requests that I put the ACU disk into drive A, then states that it will reboot the system to boot off of this floppy. OK. Reboot and I get non-system disk everytime. I have created the disks (2 total) 3 or 4 times to no avail. These disks are simply not bootable. The option to run the ACU from the system partition is not an option. So I'm left with either I have a bunch of bad floppies, a broken system, or I just don't understand what I'm doing. I guess it's possible that one HAS to create the array after the installation of an OS. Could this be? Am I supposed to create the array AFTER OS installation? Am I missing a step? -- RtX... Ty Unes - Overland Park, Ks. riverty(a)gmail.com

3 5

Re: Metis
by Jared 12 Mar '07

12 Mar '07

> The original rant remains standing: On a philosophical level, > virtual machine layers limit the geek. Some geeks like that. > This one prefers freedom. > > I think I'm the complete opposite. I love the fact that > VMWare/QEmu/etc.. are coming along and creating a virtual machine where > I don't have to worry about hardware compatibility anymore. I'd like to > eventually have preconfigured/pretuned virtual machines that are > specific to a job function become the norm. This makes server > migrations, turn-ups, turn-downs, etc.. far easier imho. But this is > coming from a SysAdmin, not a programmer, so that may be the difference. Hmmm. Hadn't thought of this angle. Compelling reason for a virtual layer. Good point. -Jared

1 0

Sendmail Help request
by Jeffrey McCright 11 Mar '07

11 Mar '07

All, I have the following system configuration: Generic White box computer Intel Celeron 466mhz processor 256 MB RAM 20 GB PATA Hard Drive ZyXEK U-1496e External Data/Fax/Voice Modem Realtek 10/100 nic Red Hat Linux 9 Sendmail v 8.12 Before I go further, I have NO desire to update or upgrade any hardware, software, or OS in this system! All devices are working properly. I am using vocp to auto answer my voice modem, take messages, encode those messages into OGG formatted attachments and attempting to use sendmail to send my messages to my hotmail or gmail accounts. Everything works great until I try to send my messages to an external mailserver. In other words, my messages can be accessed from my local mail account whe I send them to say root(a)localhost.localdomain, but when I try to mail to jmccright(a)hotmail.com, my messages bounce. I know absolutely nothing about sendmail and I am using a default configuration of Sendmail. What am I missing? Is there some change I need to make to my /etc/mail/sendmail.cf file to allow me to send to external mailservers? Thanks in advance for any help you can provide, Jeffrey A. McCright, A+ jmccright(a)hotmail.com jeff.mccright(a)gmail.com _________________________________________________________________ Mortgage rates as low as 4.625% - Refinance $150,000 loan for $579 a month. Intro*Terms https://www2.nextag.com/goto.jsp?product=100000035&url=%2fst.jsp&tm=y&searc…

4 7

Rackmount drawer
by cragos＠gmail.com 10 Mar '07

10 Mar '07

Does anyone have an old rackmountable drawer you could part with? At my last job I had an old more-yellow-than-beige shelf with XT keyboard that would have been perfect for a project I have coming up. It's a personal project, and I'm a poor person, so I can't part with much more than $20. Many thanks, Sean Crago/MrZaius

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

KCLUG